Buying a new furnace may not be a priority right away. But it’s wise to learn the things that will likely impact your choice when you’re ready to buy. Here are seven things you’ll want to think about when it’s time for furnace replacement in Denver.
1. Size and Installation Quality
To operate at maximum efficiency and comfort, your furnace must be correctly sized for your home. When it involves furnaces, bigger is definitely not better. We often get requests from customers to purchase a big furnace in the misguided belief that a larger furnace is either more reliable or will provide better comfort.
The opposite is true. Oversized furnaces will short cycle, or constantly turn on and off. This leaves you uncomfortable, with higher energy bills and a furnace that could need replacing much sooner.
This is why it’s important to work with the right company when purchasing a new furnace. Even if it’s the correct size but improperly installed, the U.S. Department of Energy says you could lose as much as 30% of your energy efficiency.
Another key component of installation is ductwork. If yours is old or designed wrong, you might have problems with noise or comfort. A furnace is only as effective as the duct system it’s attached to.
At Service Experts Heating & Air Conditioning, our Expert HVAC technicians are ACE certified, which means they’re skilled in repairing and installing various kinds of home comfort systems. In addition to technical skill, our technicians are also trained in treating you ethically. We also stand behind our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are rated by a term called AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this rates the annual gas consumption of a furnace. The greater the number, the less gas is wasted during the heating process.
If your current furnace is 15 years old, it’s likely ranked well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re throwing away up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work today:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—highest efficiency rating available.
3. Blower Motor Technology
As you research new furnaces there is one more important thing to consider: blower technology. This part moves air throughout your home. And it also uses a lot of electricity, so it’s important to be familiar with your options.
There are three kinds of blowers available on furnaces nowadays. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a traditional blower motor that’s been relatively the same for the past 30 years. This motor is the least expensive and also the least energy efficient.
- Constant torque motor. This technology finds a balance between cost and energy efficiency. It delivers an electrical efficiency boost over a traditional motor design.
- Variable-speed motor. The most energy-efficient furnaces can run at different speeds. Instead of running at full blast 24/7, they will quietly operate at a low or medium speed at times. This helps improve your comfort while keeping energy costs down, both in the winter and summer. And it also keeps indoor humidity under control.
4. Sound Reduction Technology
Sound has become a very significant consideration with furnace installation, so another dramatic improvement has been noise management. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Whisper-quiet gas burners
With this technology, you might not even be aware that your furnace is running.
5. Smart Thermostat
You probably use a programmable thermostat, but it's quite possible you probably aren’t maximizing your energy savings. These thermostats can be challenging to program, especially if your schedule varies from day to day.
A smart thermostat eliminates all the guessing about energy efficiency. Many models can pick up on your temperature preferences and then create an energy-saving schedule to match. They also know when you’re home or away and will adjust your heating and cooling as needed.
As a bonus, you’ll also be able to monitor and change your settings from just about anywhere on your phone. Some models can even notify you if they detect a problem with your furnace or remind you when it’s time to change your air filter.
6. Warranty
There’s a major difference in furnace quality and reliability. Like any big purchase, we believe it’s wisest to go with a major brand name. With a leading brand like Lennox® or Goodman®, you’ll have more confidence in the technology and that the manufacturer will stand by its product warranty over the long haul.
Furnaces usually have two primary warranty coverage areas:
- Heat exchanger. This is the heart of the furnace and the costliest component to replace. This part usually has a 20-year limited warranty or lifetime limited warranty, but this can vary based on the manufacturer and furnace model.
- Main parts. This includes the blower motor, electronic controls, ignitors and other key parts. Warranties can range from as little as a one-year limited warranty to as much as a 10-year limited warranty.
When going over warranty coverage, it’s essential to know it's limited. So, you should make sure you understand the restrictions. For instance, nearly all standard manufacturer warranties only include the price of the replacement part, not labor. And labor on a replacing heat exchanger could get very expensive.
Once your new furnace is running, make sure you finish the product registration immediately. Many manufacturers may reduce the warranty term if the product registration is not done. This step is simple and typically only takes a few minutes.
7. Cost
How much does all this cost anyhow? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency model.
As you think about these costs and the affect on your budget, remember that unlike nearly every other appliance you may need to buy, your new furnace may help pay for itself from the monthly energy savings it provides.
A couple of additional ways to save include:
- Getting a new air conditioner at the same time.
- Purchasing at the ideal time, such as in early fall, mid-winter and early spring. You may be able to get extra discounts and rebates during this less busy season.
- Take advantage of rebates from the federal and state government, as well as from your local utility company. We can help you figure out this process.
- Finance your new furnace or enroll in our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll receive a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to search for in a new furnace, when should you replace your old one? Here are a few tips from our Experts that will help you decide.
Age
Heating systems usually last 15–20 years. How long yours will keep going depends on whether you’ve kept up with furnace maintenance, where you live and your temperature preferences. If you’re in a place with harsh winters, your furnace will operate more frequently, potentially making it wear out sooner. The same goes if you like to keep your home at a hotter temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces get older, the potential for frequent furnace repair increases. If your system is more than 15 years old, those repairs can be particularly expensive. Common and expensive repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are greater than the half the cost of a new furnace, it’s generally recommended to replace it.
Energy Efficiency
Furnaces older than 15 years can be very inefficient. You could be wasting as much as 30% of the money you spend to heat your home. High energy costs and the desire to reduce energy consumption are also strong reasons to consider replacing your furnace. In fact, an independent study by Decision Analyst shows nearly 20% of homeowners who recently replaced their furnace specifically did so to reduce their utility bills.
Trust Your Furnace Replacement to the Experts
It can seem intimidating trying to investigate furnace features on your own. Or recognize exactly when you should replace your furnace. Our Service Experts Heating & Air Conditioning Experts are here to make the process much simpler. Contact us at 303-647-5853 or schedule an appointment online to request your free home comfort assessment today.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.